Home > Product Information > Motorized Actuators >
DG Series(LEGACY) > List of Product > DG200R-ASBSD
- Accessory
- Actuator, Control Circuit, I/O signal Connector, Mounting Brackets for Control Circuit (with screws), Operating Manual
- Safety Standards
-
| Product Name | Product Leadtime | CIF: Unit Price(MYR) | FOB: Unit Price(MYR) | |
|---|---|---|---|---|
| DG200R-ASBSD | Please contact us for more info | Please contact us for more info | Please contact us for more info |
You cannot add this product to a cart. Sorry for your inconvenience but please contact to customer support centre.
●Production Information
Discontinued product in 1/Apr./2018
●Component Name
DGM200R-ASBC（Actuator）
ASD20A-SD（Control Circuit）
| Shaft Type | Double Shaft |
|---|---|
| Output Table Supporting Bearing | Cross-Roller Bearing |
| Frame Size | 200mm |
| Electromagnetic Brake | Without |
| Driver Type | Built-In Controller Type |
| Repetitive Positioning Accuracy | ±15sec （±0.004˚） |
| Resolution | 9000～180000P/R |
| Maximum Holding Force - Power ON | 36Nm |
| Maximum Holding Force - Power OFF | 0Nm |
| Lost Motion | 2min (0.034˚) |
| Permissible Torque | 50N･m |
| Inertial Moment J | 108160×10^-6kg・m^2 |
| Permissible Speed | 110r/min |
| Gear Ratio | 18 |
| Angular Transmission Error | 2min (0.034˚) |
| Permissible Thrust Load | 4000N |
| Permissible Moment Load | 100N･m |
| Runout of Output Table Surface | 0.015mm |
| Runout of Output Table Inner (Outer) Diameter | 0.03mm |
| Parallelism of Output Table | 0.05mm |
| Actuator Degree of Protection | IP40** |
| Standard | UL、CSA |
| CE Marking | affixed |
| Speed and Positioning Control Command | Stored data |
| Power Supply Input - Voltage | Three-Phase 200-230VAC -15%～+10% |
| Power Supply Input - Frequency | 50/60Hz |
| Power Supply Input - Current | 2.4A |
| Mass: Actuator | 9.5kg |
| Mass: Control Circuit | 0.8kg |
- ** IP20 for motor connector
- ●The resolution can be set from 9000 P/R∼180000 P/R by using parameters.
- ●The back shaft of the motor is intended for installing a slit disc. Do not apply load torque, overhung load or thrust load to the back shaft of the motor.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
| 2D-CAD | Actuator | D1057.dxf |
|---|---|---|
| Actuator home-sensor set (accessory) is attached | D1058.dxf | |
| Control Circuit | B298.dxf | |
| 3D-CAD(web2CAD) | Actuator | to web2CAD site |
| Control Circuit | to web2CAD site | |
| Document | DG | ls_drl_a.pdf |
| Operating Manual | Hollow Rotary Actuators DG Series DG85, DG130, DG200 BuiltIn Controller(Stored Data) Package | HG-8041E.pdf |
| Dimension |
|---|
|
Actuator Control Circuit |
| Characteristics Diagram |
|---|
|
Characteristics |
| Other specifications |
|---|
|
Other specifications Safety Standards |