Home > Product Information > AC Servo Motors >
NX Series > List of Product > NXM940M-PS10+NXD75-S+CC030VNFB
- Accessory
- Control Circuit:Connector for I/O Signal, Motor Connector, Connector for Regeneration Unit Input/Main Power Input Terminals, Connector for 24 VDC Power-Supply Input/Regeneration Unit Thermal Input/Electromagnetic Brake Terminals, Connector Wiring Lever
Motor : Parallel Key
Cable: Connection cable is 3m long. Flexible Cable types and other lengths are available. For details, please refer to the cable dimensions.
- Safety Standards
Product Type | Product Name | Product Leadtime | CIF: Unit Price(MYR) | FOB: Unit Price(MYR) | |
---|---|---|---|---|---|
Motor | NXM940M-PS10 | 48 working days | 5,376 | 4,515 | |
Control Circuit | NXD75-S | 48 working days | 3,996 | 2,918 | |
Cable Set | CC030VNFB | 28 working days | 686 | 466 |
Product Leadtime based on CIF terms
●Production Information
Current product *Cables are available in flexible types and other lengths.
Frame Size | 90mm |
---|---|
Shaft/Gear Type | PS Geared Type |
Electromagnetic Brake | equipped |
Included Cable | 3m |
Rated Output Power | 400W |
Motor Permissible Speed | 3000r/min |
Permissible Torque | 11.4N・m |
Maximum Torque | 34.3N・m |
Permissible Speed Range | 0~300r/min |
Rotor Inertia J | 0.314×10-4kg・m2 *1 |
Gearhead Internal Inertia J | 0.160×10-4kg・m2 *1 |
Permissible Load Inertia J | 0.146 kg・m^2 *2 |
Resolution (Motor Shaft) | 100~100000P/R(Factory setting 1000) *3 |
Detector | Absolute Encoder 1 rotation 20 bits, multiple rotations 16 bits |
Backlash | 15 arcmin |
Gear Ratio | 10 |
Power Supply Input Voltage, Frequency, AC Main Power Supply | Three-Phase 200-230 VAC −15 to +10% 50/60 Hz |
Power Supply Input Voltage, DC Control Power Supply | DC24V -10~+10% 0.8 A |
Power Supply Input Rated Input Current | 2.8A *4 |
Electromagnetic Brake Type | Power off activated type *5 |
Electromagnetic Brake Power Supply | DC24V -10%~+10% |
Electromagnetic Brake Power Supply Input | 7.2W |
Electromagnetic Brake Power Supply Current | 0.3A |
Electromagnetic Brake Power Static Friction Torque | 11.4N・m |
Command Method | Pulse, Analog Speed Command Voltage, Analog Torque Command Voltage |
Maximum Input Pulse Frequency | Line driver output by programmable controller:500kHz(When the pulse duty is 50%) Open collector output by programmable controller:250kHz(When the pulse duty is 50%) The values when the separately-sold general-purpose cable(CC36D1E)is used. |
Protective Function | When the following protective functions are activated, an alarm output signal is output and the motor is stopped. Overflow, Overcurrent Protection, Overheat Protection, Overvoltage Protection, Main Power Supply Error, Undervoltage, Motor Overheat Protection, Sensor Error during Operation, Encoder Communication Error, Overload, Overspeed, Position Range Error, Absolute Position Loss, Command Pulse Error, EEPROM Error, Sensor Error during Initialization, Rotor Rotation during Initialization, Encoder EEPROM Error,Motor Combination Error, ABS Not Supported, No Battery, Regeneration Unit Overheat, Electronic Gear Setting Error |
Mass: Motor | 4kg |
Mass: Control Circuit | 1.6kg |
- *1 The gearhead internal inertia is the motor shaft converted value.
*2 The value for 50 times the rotor inertia.
*3 The resolution for the motor output shaft.
*4 These values are for operation in the continuous duty region. For operation in the limited duty region, the maximum current is approximately 3 times the value shown.
*5 The electromagnetic brake is for holding the position when the power supply is OFF. The electromagnetic brake cannot be used to stop the motor. A separate power supply for the electromagnetic brake is also required.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
2D-CAD | Motor | C255.dxf |
---|---|---|
Control Circuit | C224.dxf | |
3D-CAD(web2CAD) | Motor | to web2CAD site |
Control Circuit | to web2CAD site | |
Document | CE Declaration of Conformity | DoC-6038.pdf |
UL Certification(Control Circuit) | UL_E171462V4S4.pdf | |
UL Certification(Motor) | UL_E336472V2S5.pdf | |
Catalogue | NX Series | NX Series_a_1.pdf |
NX Series | NX Series_a_2.pdf | |
Operating Manual | NX Series USER MANUAL | HM-40073E.pdf |
Data Setter OPX-2A OPERATING MANUAL Before Use | HM-40142E.pdf | |
Data Setter OPX-2A OPERATING MANUAL NXSeries | HM-40097E.pdf |
Dimension |
---|
Motor Control Circuit Cable Set(1m~20m) |
Characteristics Diagram |
---|
Speed - Torque |