αSTEP AR Series
ARD-C
Control Circuit
| Product Classification | Product Name | CIF: List Price | FOB: List Price | Shipping Date |
|---|---|---|---|---|
| Control Circuit | ARD-C | MYR 2,187 | MYR 1,677 | 8 Working Days |
Included
- Control Circuit: Connector for 24 VDC Power Supply Input/Regeneration Resistor Thermal Input/Electromagnetic Brake Connection Terminal, I/O Signal Connector, Connector for Regeneration Resistor Input/Main Power Input Terminals, Connector Wiring Lever
Specifications
Dimensions
Data Download
Other Specifications
Driver Specifications
| Built-in Controller Type | Pulse input type | |||
|---|---|---|---|---|
| Input/Output Function | Maximum Input Pulse Frequency | − | Line driver output by host controller: 500 kHz (at 50 % duty) Open-Collector Output by Host Controller: 250 kHz (at 50 % duty)*1 Negative Logic Pulse Input (Initial value) |
|
| Number of Positioning Data Sets | 64 Points | − | ||
| Direct Input | 8 Points | 8 Points | ||
| Direct Output | 6 Points | 9 Points | ||
| RS-485 Communication Network Input | 16 Points | − | ||
| RS-485 Communication Network Output | 16 Points | − | ||
| Setting Tool | Data Setting Software MEXE02 | ◯ | ◯ | |
| Control Module OPX-2A | ◯ | ◯ | ||
| Operation | Positioning Operation | Single-motion Operation | ◯ | − |
| Linked Operation | ◯ | − | ||
| Sequential Operation | ◯ | − | ||
| Direct Operation | ◯ | − | ||
| Push-Motion Operation | ◯ | ◯*2 | ||
| Continuous Operation | ◯ | − | ||
| Return-to-Home Operation | ◯ | − | ||
| JOG Operation/Test Operation | ◯ | ◯*2 | ||
| Monitor/Warning | Waveform Monitoring | ◯ | ◯ | |
| Overload Detection | ◯ | ◯ | ||
| Overheat Detection (Motor and Driver) | ◯ | ◯ | ||
| Position/Speed Information | ◯ | ◯ | ||
| Temperature Detection (Motor and Driver) | − | − | ||
| Motor Load Factor | − | − | ||
| Travel Distance , Cumulative Travel Distance | − | − | ||
| Alarm | ◯ | ◯ | ||
- *1
- The value when the general-purpose cable (CC36D1E) (sold separately) is used.
- *2
- Setting with extended function (MEXE02 or OPX-2A)
Note
- Do not perform push-motion operation using geared types. Doing so may damage the motor or gearhead.
Driver General Specifications
| Item | Specifications | |
|---|---|---|
| Operating Environment (When operating) |
Ambient Temperature | Built-in Controller Type: 0 ∼ +55 ℃ (Non-freezing)* Pulse Input Type: 0 ∼ +50 ℃ (Non-freezing)* |
| Ambient Humidity | 85% max. (Non-condensing) | |
| Atmosphere | No corrosive gases or dust. No exposure to water, oil or other liquids. | |
- *When installing a heat sink equivalent to an aluminum plate min. 200×200 mm, thickness 2 mm
Standards
Regulations and Standards Materials
Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)
Explanations of the Global Laws, Regulations and Standards can be found here.
Information about our compliance with regulations and standards for each of our product series can be found here.
Hazardous Substances
The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).
Cables and Accessories
You can add it to "Quote and Purchase at the Online Shop" by checking the product name column.
close
close