Cables: For AZ Series DC Input Multi-Axis Driver
- * Be sure to use a connection cable for the connection between the motor and the driver.
(The motor cable and electromagnetic brake cable from the motor cannot be connected directly to the driver.)
| Number in Illustration | Application | Cable Name |
|---|---|---|
| [1] | [For AZM14, AZM15, AZM24, AZM26 DGM60, DR20, DR28] |
Connection Cable Set for Motor |
| Flexible Connection Cable Set for Motor | ||
| [For AZM46, AZM48, AZM66, AZM69 DGB85, DGM85, DGB130, DGM130 DRSM42, DRSM60, LM2, LM4] |
Connection Cable Set for Motor | |
| Connection Cable Set for Motor/Electromagnetic Brake | ||
| Flexible Connection Cable Set for Motor | ||
| Flexible Connection Cable Set for Motor/Electromagnetic Brake |
- * Use a flexible cable set in applications where the cables are bent. Click here for notes on the use of flexible cables
| Number in Illustration | Cable Name |
|---|---|
| [2] | DC Power Supply Cable For Main Power Supply |
| DC Power Supply Cable For Control Power Supply |
Connection Cable
This cable can be used to connect the motor with driver.
[1] Connection Cable Set/Flexible Connection Cable Set for Motor
(For AZM14, AZM15, AZM24, AZM26 DGM60, DR20, DR28)
| Length (m) | Connection Cable | Flexible Connection Cable | |
|---|---|---|---|
| Product Name | Product Name | ||
 |
0.5 | CC005VZ2FA | CC005VZ2RA |
| 1 | CC010VZ2FA | CC010VZ2RA | |
| 1.5 | CC015VZ2FA | CC015VZ2RA | |
| 2 | CC020VZ2FA | CC020VZ2RA | |
| 2.5 | CC025VZ2FA | CC025VZ2RA | |
| 3 | CC030VZ2FA | CC030VZ2RA | |
| 4 | CC040VZ2FA | CC040VZ2RA | |
| 5 | CC050VZ2FA | CC050VZ2RA | |
| 7 | CC070VZ2FA | CC070VZ2RA | |
| 10 | CC100VZ2FA | CC100VZ2RA | |
| 15 | CC150VZ2FA | CC150VZ2RA | |
| 20 | CC200VZ2FA | CC200VZ2RA |
[1] Connection Cable Set/Flexible Connection Cable Set for Motor
(For AZM46, AZM48, AZM66, AZM69 DGB85, DGM85, DGB130, DGM130 DRSM42, DRSM60, LM2, LM4)
| Length (m) | Connection Cable | Flexible Connection Cable | |
|---|---|---|---|
| Product Name | Product Name | ||
 |
0.5 | CC005VZFA | CC005VZRA |
| 1 | CC010VZFA | CC010VZRA | |
| 1.5 | CC015VZFA | CC015VZRA | |
| 2 | CC020VZFA | CC020VZRA | |
| 2.5 | CC025VZFA | CC025VZRA | |
| 3 | CC030VZFA | CC030VZRA | |
| 4 | CC040VZFA | CC040VZRA | |
| 5 | CC050VZFA | CC050VZRA | |
| 7 | CC070VZFA | CC070VZRA | |
| 10 | CC100VZFA | CC100VZRA | |
| 15 | CC150VZFA | CC150VZRA | |
| 20 | CC200VZFA | CC200VZRA |
[1] Connection Cable Set/Flexible Connection Cable Set for Motor/Electromagnetic Brake
(For AZM46, AZM48, AZM66, AZM69 DGB85, DGM85, DGB130, DGM130 DRSM42, DRSM60, LM2, LM4)
| Length (m) | Connection Cable | Flexible Connection Cable | |
|---|---|---|---|
| Product Name | Product Name | ||
 |
0.5 | CC005VZFBA | CC005VZRBA |
| 1 | CC010VZFBA | CC010VZRBA | |
| 1.5 | CC015VZFBA | CC015VZRBA | |
| 2 | CC020VZFBA | CC020VZRBA | |
| 2.5 | CC025VZFBA | CC025VZRBA | |
| 3 | CC030VZFBA | CC030VZRBA | |
| 4 | CC040VZFBA | CC040VZRBA | |
| 5 | CC050VZFBA | CC050VZRBA | |
| 7 | CC070VZFBA | CC070VZRBA | |
| 10 | CC100VZFBA | CC100VZRBA | |
| 15 | CC150VZFBA | CC150VZRBA | |
| 20 | CC200VZFBA | CC200VZRBA |
Other Cables
Lead wires with connector for exclusive use with AZ Series multi-axis drivers. The main power supply and control power supply sections can be easily connected.
Cable Note When Wiring Flexible Cable
Do not bend the cable at the connector. Stress applied to the connectors and terminals causes poor contact and disconnection.
How to Fix the Cable
Fix the connector part in 2 places to prevent it from moving.
Wiring Length and Bending Radius of the Cable
Wiring should be installed at an appropriate length, so that cables are not pulled during movement.
In addition, the bending radius (R) should be 6 times the cable diameter min.
Interference of the Cable
Wire the cables in the cable holder without bringing them into contact with each other. This will add stress to the cable, and cause it to break prematurely. Please check note on cable holders carefully before use.
Cable Kinks
◇Please wire without kinks in the cable. Kinking in a twisted state can cause premature disconnection. After wiring, confirm that there are no kinks in the cable, using the print on the cable surface as a reference.