αSTEP AZ Series Multi-Axis Driver DC Input

AZD2A-KS3

Print Product Information All at once
AZD2A-KS3

Control Circuit

Product Classification Product Name CIF: List Price FOB: List Price Shipping Date
Control Circuit AZD2A-KS3 MYR 3,976 MYR 3,049 7 Working Days
Multi-Axis Driver is DC input. Products that can be connected are AZ series DC power input motor and electric actuator equipped with them. For details, please contact your nearest sales office or Customer Support Center.

Included

  • Control Circuit: Connector Set for Driver, Connector Cap

Specifications

Data Download

Other Specifications

SSCNET III/H Specifications

Item Description
Transmission Rate 150 Mbps
Communication Cycle 0.44 ms/0.88 ms
Calculation Period 0.44 ms/0.88 ms/1.77 ms/3.55 ms
Compatible Controller
  • Simple Motion Unit
  • Motion Controller

General Specifications

Degree of Protection IP10
Operating Environment Ambient temperature: 0~50 °C (non-freezing)
Humidity: 85 % max. (Non-condensing)
Altitude: Up to 3000 m above sea level
Atmosphere: No corrosive gases or dust. Do not expose to water or oil.
Storage Conditions
Shipping Environment		 Ambient temperature: -25~+70 °C (non-freezing)
Humidity: 85 % max. (Non-condensing)
Altitude: Up to 3000 m above sea level
Atmosphere: No corrosive gases or dust. Do not expose to water or oil.
Insulation Resistance

When a 500 VDC megger is applied to the following locations, resistance is min. 100 MΩ.

  • Between FG terminal - power supply terminal
Dielectric Strength

Sufficient to withstand the following for 1 minute:

  • Between FG terminal - power supply terminal 1 kVAC 50/60 Hz Leakage current 10 mA max.

Note

  • Disconnect the motor and driver when conducting the insulation resistance measurement or the dielectric strength test.
    Also, do not perform these tests on the ABZO sensor part of the motor.

Standards

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with regulations and standards for each of our product series can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

System Configuration

System Configuration

Cables and Accessories

Data Download
Print Product Information All at once
close